INSTALLTION:

1.mesh rattan weave (soak in warm water for about 30 minutes)
2. Vine core: For widths below 60CM, it is recommended to use 5-6MM diameter rattan core edge pressing. For widths above 6OCM, it is recommended to use 7-8MM diameter rattan core edge pressing
3. Martin: Used for nailing and pressing strips
4. Personnel: 2-3 people
Step 1: Press the first long edge
Precautions:
1. Align the mesh with the groove
2. The rattan core is pressed at the center of the hollow mesh hole
Step 2: Press the first short edge
Step 3: Press the second long edge
Step 4: Press the second short edge